Your First Steps

Registration

To use the PULSENSE, register an account with Epson sensing services.
Launch the application, select the Register button and follow the on-screen instructions.

  1. Registration

    Registration

    Click the Create an account button on the Login screen of the PULSENSE View App.

  2. Create an account

    Create an account

    Create a PULSENSE account.

  3. Enter confirmation code

    Enter confirmation code

    Open the email delivered to the email address that you entered.
    Enter the confirmation code stated in the email.
    Access the code and complete your registration within 30 minutes after the email is delivered.

  4. Profile Settings

    Profile Settings

    Enter your profile on the Profile screen.

  5. Smartphone connection

    Smartphone connection

    Entry is finished. Next, connect your PS-500 to your smartphone.
    To Smartphone Connection→

Connection

The process of connecting a smartphone and PULSENSE via Bluetooth is known as pairing.

  1. Confirming Bluetooth status

    Confirming Bluetooth status

    Please confirm that Bluetooth is turned on in the settings menu of your smartphone.

  2. Charge your PULSENSE

    Charge your PULSENSE

    Connect your PS-100 to the cradle to charge the battery, then remove it when the LED turns blue (fully charged).

  3. Selection of devices

    Selection of devices

    Select the device to be connected to the smartphone.

  4. Pairing your device via Bluetooth

    Pairing your device via Bluetooth

    Tap the PS-500 screen twice to display the settings screen.

  5. Go to the pairing mode

    Go to the pairing mode

    Press the B button once to display the Bluetooth configuration screen.

  6. Go to the pairing mode

    Go to the pairing mode

    Press the A button once to enable Device Pairing.

  7. Confirm the device number

    Confirm the device number

    Please verify the 3-digit number shown on the PULSENSE display.
    Please select the same number displayed on the pairing screen of your smartphone, and then press "Register" to establish a pairing.
    If pairing is unsuccessful→

  8. Heart rate detection check

    Heart rate detection check

    Wear your PULSENSE.
    To heart rate detection check →

HR detection check

Wear the PULSENSE on your wrist.

  1. Wear your PULSENSE

    Wear your PULSENSE

    Wear PULSENSE on your non-dominant wrist, placed above the ulna bone.
    Correct method→

  2. Start heart rate detection

    Start heart rate detection

    Start monitoring your heart rate by pressing the A button.
    Once your heart rate is detected, it is displayed on the screen.
    If the heart rate cannot be detected→

  3. Ensure that the real-time meter shows your heart rate

    Ensure that the real-time meter shows your heart rate

    If your heart rate is detected correctly, the real-time meter your current heart rate.
    The heart rate information is updated every four seconds.
    If the heart rate is not displayed on the screen→

Initial Configuration

In order to connect the device to your PC and upload your data to PULSENSE View, you must first complete the following two steps.
1. Create an account (set up profile)
2. Register your device *
Once registration is complete , the date and time of your PC and device (PS-500) will be synchronized.
*To register your device, you need to place your device (PS-500) on the cradle and connect it to your PC.
Please make this connection when the PC connection information screen is displayed during this process.

  1. Install PS Uploader

    Install PS Uploader

    First of all, download and install the PS Uploader (software) on your PC.
    Install PS Uploader→

  2. Create Account

    Create Account

    Click on "Create an Epson Sensing ID."
    Create Account→
    The menu is not displayed→

  3. Create Account

    Create Account

    You can create an Epson Sensing ID through PULSENSE View.Launch PULSENSE View.

  4. Enter confirmation code

    Enter confirmation code

    Open the email delivered to the email address that you entered.
    Enter the confirmation code stated in the email.
    Access the code and complete your registration within 30 minutes after the email is delivered.

  5. Profile registration

    Profile registration

    Fill out your profile to finish account creation.
    Push the next button to proceed to device registration.
    To device registration→

Connecting your device

The term Activation refers to configuring your PC and PULSENSE to connect to each other. In order to carry out this configuration, you need to place PULSENSE on the cradle and connect it to your PC.

  1. Open the menu

    Open the menu

    Open the menu and click For those who have an Epson Sensing ID.
    If the menu does not show up→

  2. Login

    Login

    Enter your registered ID and password to login.

  3. Connecting PULSENSE to the charging cradle

    Connecting PULSENSE to the charging cradle

    The message Connect the device to the cradle, will be displayed, so follow the instructions displayed onscreen.

  4. Registering your PULSENSE

    Registering your PULSENSE

    Please do not remove the wrist device until registration is complete.

  5. Device registration complete

    Device registration complete

    Device registration is complete when this window is displayed and your browser starts up.

HR detection check

Wear the PULSENSE on your wrist.

  1. Wear your PULSENSE

    Wear your PULSENSE

    Wear PULSENSE on your non-dominant wrist, placed above the ulna bone.
    Correct method→

  2. Start heart rate detection

    Start heart rate detection

    Start monitoring your heart rate by pressing the A button.
    Once your heart rate is detected, it is displayed on the screen.
    When the heart rate cannot be detected→

Data upload

The data is uploaded to PULSENSE View web via the PS Uploader app installed on your PC.

  1. Connect PULSENSE to the cradle

    Connect PULSENSE to the cradle

    Connecting to the charging cradle.

  2. Start the PS Uploader App

    Start the PS Uploader App

    Once the PC Uploader app is running, it will automatically upload your data the the PULSENSE View web app.

  3. View your data

    View your data

    After your data upload is completed, your browser will automatically open the PULSENSE View web app.
    In case HR figure is not indicated on the screen→